Three Brothers Plumbing Supplies

I bit off more than I could chew with a bathtub faucet replacement. I ended up calling a plumber to help me get it apart. He charged me $75 just to take it apart. I had a spare faucet, but he said it wouldn't work and it would cost $600 for him to finish the work. $37 in parts, some great advice from Steve at 3 Brothers, and 1 hour of putting it all together, I'm all set!!!! Words can't express how awesome and helpful and patience he was!

I have a house that was built in the 1800's and one built in the 1920's. Several times I've brought 3 Brothers a stem or faucet handle they've never or rarely seen. Each time I walked out with the part I needed. Thanks to their inventory and helpful persistence in searching I've avoided a lot of additional plumbing work. Keep in mind this is a small specialty shop. They can't eat the cost of casual returns like big box stores.

Great experience with the South Hills staff. I had an issue with a commercial Sloan valve. I described the symptoms and the gentleman knew the exact problem. He advised the building pressure needs to be between 50 and 75 psi. I ked that we are probably at 49 or 76 psi. He recommended a simple pressure gage and faucet adapter. I also purchased several Sloan valve repair kits. We tested pressure at the extreme ends of our 130,000 sq ft facility and at inlet .wou would you know it, we were at 49 PSI. We replaced the Sloan diaphragm, increased pressure to 52 PSI and everything works great!

Thanks for the time and assistance!

These guys know EVERYTHING about plumbing. No matter how old your house is, they will have the part you need. Be aware – if you plan to use a credit card I believe the minimum amount is $10 or $15.

Needed a gas vapor sensor that worked with a White Rodgers water heater thermostat. Called a bunch of places and nobody had one. Three Brothers had a 25 volt for a Rheem unit which looked the same as the WR so I figured I’d give it a shot. Went down to pick it up and it was out on the front desk when I got there! Great customer service and the part worked great! No more cold showers!

I went to a competitive plumbing supplies store,staff would not give me the time of day,i tried to explain my dilemma to them,one guy who was in the back with him came over and looked at my part and told me i would have to change the whole valve i,e cut out the rest of the valve,i went to three brothers supply co the counter man listen ed to me explain what was happening then he told me he could and would help me out.10 minutes later he had me all brand new,i didn't need to cut anything out at alljust rebuilt it ,all i had to do was put it back toge THREE BROTHERS PLUMBING,SAW MILL RUN BLVD. ALL DAY BABY,ILL NEVER GO BACK TOO WATERWAY PLUMBING SUPPLY AGAINther

While they didn't have the part I was looking for, they did recommend another local shop who they thought would. I really appreciate the honesty and helpfulness!

This is the "Go To" place for your plumbing and HVAC needs. Plop what you need on the counter, wait 30 seconds and a new one is there ready for purchase.

Very helpful, kindly demonstrated how to use the tool recommended for my project and I was able to complete my task the first try!! Thanks!

These guys are great! Knowledgeable. Have everything I always need. Top tier of the burgh!

The employees are very knowledgeable and very helpful,and great services, i recommended for all piping services.

Very professional. My recommendation

Call care of all my plumbing needs

Helpful with my plumbing needs